Potable Water Pipe Solutions
Meets the requirements of NSF/ANSI 61
NuFlow offers a variety of solutions tailored to specific potable water pipe requirements. From pinholes in copper lines to lead service lines, NuFlow has the technology to tackle the toughest water line infrastructure problems.
NuLine corrosion control coating restores aged, corroded water pipe systems to a “like new” condition while leaving the pipes in place, avoiding the expense and disruption of pipe replacement. The epoxy coating is applied to the pipes’ interior, which seals and protects the system from further deterioration and dramatically extends the system’s life.
Pressurized systems including potable, HVAC, fire suppression, gas, and compressed air, NuLine can be installed in pipelines with diameters of 1⁄2 inch to 12 inches in diameter.
The epoxy coating is safe and non-toxic, meets the requirements of NSF/ANSI 61, and is approved for use in cold and hot potable water applications systems down to 1/2” in pipe diameter. The cured epoxy product is extremely durable and resistant to the corrosive action of acids, alkalis and petroleum.
Creates a barrier between the pipe and liquid flowing through it
Used on a variety of piping applications, such as piping laterals, elbows in all configurations, above and underground piping systems, risers, gradient piping and branches
Will accommodate pipe lengths that have varying pipe diameters in a single pipe segment as short as a few inches or as long as 1,000 feet
Lead Pipe Lining
The Serline lead pipe lining process is faster and costs less than conventional pipe replacement, the 2-hour cure time means same day return to service, and a comprehensive audit trail provides quality assurance and peace of mind. The Serline process features a NuFlow-developed polyurethane-polyurea hybrid resin. The flexible resin coats the inside of lead pipes, creating a barrier between the lead pipe and the water. The resin also spans small defects, thereby reducing leakage and improving pressure and flow characteristics.
More than 13,000 lead service lines worldwide have been rehabilitated using the Serline process.
Pressurized CIPP Pipe Lining Solutions
NuForce structurally repairs high pressure potable water mains in diameters from 2” to 24” NPS (50mm to 600mm) with minimal disruption. NuForce meets the requirements of NSF/ANSI 61.
Key Features and Benefits
- Composite liner structurally repairs high pressure pipe 2” and up
- Higher crush and burst strength than AC and UPVC
- High stiffness
- 100% solids “zero shrinkage” epoxy resin with advanced fiberglass reinforcement